This fits your .
The Dustless Technologies 16006 HEPA Wet/Dry Vacuum is the perfect tool for professional remediation jobs. The 16006 is a fully certified HEPA vacuum with a certified and tested HEPA filter, rated at .3 microns of filtration. This vacuum meets EPA regulations of silica, lead, and asbestos removal and dust containment. A dual filtration system, including the HEPA filter and filter cover, can be optimized by using Dustless Technologies 13141 Micro Pre-Filter Bags. This can extend the life of the HEPA filter 10 times longer. The 16006 can vacuum from dry to wet without having to switch filters. An interior baffle wall will protect the filters from getting wet and prevent overfilling. The filter cover is machine washable. This vacuum is capable of capturing tiny dust particles and will never blow dust into the air. Excellent choice for professional contractors and remediators who need to meet EPA or OSHA guidelines. HEPA Beater Bar Floor Tool sold seperately. Includes (1) 16006 Wet/Dry Vacuum, (1) HEPA filter, (1) HEPA filter cover, (2) 13141 micro pre-filter bags, (1) 12 foot hose, (1) crevice tool, (1) floor tool, and (2) extension wands. Replacement parts are as follows: 13201 HEPA filter; 13301 HEPA filter cover; 13141 Micro Pre-Filter Bags.
The Dustless HEPA WET/Dry Vacuum gives contractors a cost-efficient way to control dust at the job site and comply with EPA Lead-Safe regulations. Not only does it have a low initial cost, but also enables users to save money down the road. Using a Micro Pre-filter greatly extends the life of the certified HEPA filter by capturing virtually everything but the smallest particles, down to .5 microns. This cost-saving system is only available through Dustless Technologies.Meet EPA Lead-Safe Guidelines
Switch from Wet to Dry Operation Without Stopping
Unlike other HEPA vacuums, the Dustless HEPA Wet/Dry Vacuum can be used to vacuum up water without fear of getting your valuable HEPA filter wet. A baffle wall inside the canister keeps water from reaching the HEPA filter, under normal operation. Go back and forth between wet and dry operation without stopping to change filters or make other adjustments.
Quiet and Powerful
The Dustless HEPA Wet/Dry Vacuum emits only 81 decibels of noise and has a powerful motor that runs at 24,140 RPMs that produces 76.9-inch water lift at 126-CFM. The 16 gallon canister and micro pre-filter bag support optimum air flow while holding up to 40 pounds of dirt and debris. Other vacuums lose suction after ingesting just several pounds of dust.
100% Recommended by Handyman Club of America
Tested by Handyman Club of America, the Dustless Technologies 16006 Wet/Dry Vacuum received a 100% approval rating. After using the 16006 in their homes, shops, and jobsites, 13 testers gave the wet/dry vac an overall member rating of 9.3. Performance scored a 10, and rating against similar products was an 8.1.
What's in the Box
1 16 gallon canister, 2 Extension wands, Certified HEPA filter, 1 HEPA filter cover, 1 WunderBag Micro Pre-Filter, 1 Crevice tool, 1 Floor Tool, 1 12 foot hose
Dustless HEPA Wet/Dry Vacuum helps recover asbestos, lead dust, and other airborne pollutants. This product meets EPA, OSHA and NIOSH requirements and is certified to IEST-RP-CC001.5, insuring a minimum filtration efficiency of 99.97% at 0.3 micron. Changes from wet to dry pickup without removing filters. Includes: 2 extension wands, crevice tool, utility nozzle, 1 micro pre-filter bag, 12-foot crushproof hose, and 16-gallon capacity canister. Water lift/air flow: 76.9-inches 126.39 CFM. 5-horsepower 10.6-amp 120-volt motor with 15-foot power cord.See more
Dustless Technologies 16006 HEPA Wet Dry Vacuum - BM1BPOAP1